PractiVet Infusion Pump
> Visual & audible alarms
> Free flow protection
> Panel lock
> Adjustable KVO & Bolus
> Anti-bolus function
> Adjustable thresholds for ‘air in line’ & occlusion alarm
> Compact & portable
> Large LCD display
> Dual Processor
> Recalibrate in clinic
> WiFi connectivity
> Infusion history & event log
> Pole clamp & cage clip
.jpg)
The VetPro 2000
-
Small but powerful
-
User friendly numeric key pad
-
Li-ION Battery - 15 hrs on a single charge
-
Light weight 360gm
-
Pole clamp & cage clamp
-
Reconditioned units $800.00 while supplies last
JorVet Syringe Pump
A syringe pump allows precise delivery of medications over a chosen time. It can be used as an infusion pump for very small patients. Works best with B/D or Terumo syringes.
Main Features:
– Recognizes syringe size automatically
– Easy to use! Just enter the flow rate and the dosage desired in mls/hr and you’re done.
– Large LED display
– Can be attached to IV pole or lay on flat surface.
?Specifications:
– Flow rate increments: 0.2 to 650 ml/hr
– Syringe size: 2ml to 50ml
– Size: 38mm (deep) x 55mm (high)
– Weight: 400gm or < 1 lb or 14.5 oz including battery
– Battery: 7.4V Li-ion 1800 mh recharge
– Limited 1-year warranty
– Languages: English, Italian, Spanish, Dutch & German
– Made in Israel, repaired in U.S.
– 0.05-10ml per hour in 0.01 increments
– 10-650ml per hour in 1 ml increments
– Weight with pole mount : 1.5lbs
– Weight without pole mount: 0.9lbs
Centrifuges
ZipCombo Centrifuge
The LW Scientific ZipCombo centrifuge is the perfect solution to your micro-centrifugation needs! It provides all the performance of popular “Stat” centrifuges at a fraction of the cost. Spin down hematocrits at 12,000 rpm in only 3 minutes. Change the rotor to spin micro tubes at 12,000 rpms for serum in 3 minutes. Then use the digital controls to decrease the speed to spin urines in microtubes, too!
Please note, EZ Reader Microhematocrit Reader is included when you order the ZipCombo with the hematocrit rotor.
-
Easily changeable rotors
-
Small footprint to conserve space
-
Comparable to popular “STAT” centrifuges
-
Results in as little as 3 minutes
Applications: Blood, Urine, DNA Separation, HPLC Microfiltration
ZipCombo Centrifuge, 12-Place Microhematocrit Rotor
Specifications:
Variable speed: 1000-12000rpm, in steps of 1000rpm
Maximum RCF = 6900g
Digital timer: 15 seconds-99 minutes or continuous mode
100-240V 50/60Hz auto-switching
24 volt brushless DC motor
Height: 5.1″ (130mm)
Length: 7.9″ (200mm)
Width: 6.3″ (160mm)
Weight: 2 lbs (0.9 kg)
ZipCombo Centrifuge with 12-place microhematocrit rotor, vial of 100 40mm capillary tubes, and EZ reader card.
Economy-8 Centrifuge, Variable Speed
USA Economy-8 Centrifuge. The Economy-8 fixed-angle centrifuge is now manufactured in the USA and loaded with improvements! This superior centrifuge is manufactured in an ISO-certified, FDA-registered USA facility and sold in the human markets, so expect American quality and support. Choose either variable speed with mechanical timer, or the new digital model.
– Quieter
– Faster: Higher G-forces mean faster serum separations
– Shorter: Fits under any counter, even with the lid open
– Cooler: Ventilation system keeps samples cool, preserving their integrity
– More Accurate: Auto-calibrating feature for exact speeds
– Braking Built-in auto-brake stops the rotor in seconds
– Digital Model More precision for urine, fecal, or semen samples
– 12v DC Motor Maintenance-free for years of uninterrupted use
– CE/CSA CE/CSA-approved DC power adapter for sale into Canada or Europe
Standard Features:
– Includes both large and small tube sleeve inserts to accommodate tubes from 3ml to 15ml
– Angled rotor for spinning blood and urine
– Suction feet for stability
– Variable speed from 500-3500rpm
– Max RCF=1535g
– Auto-switching DC power adapter (110v or 220v input)
– One year warranty on materials and workmanship
– 9.5″H x 11″W x 11″D
– Weight 9.5 lbs
LW Scientific E8 Centrifuge: 8-Place Angled
The E8 Combination Centrifuge is specifically designed to run 75mm microhematocrit tubes and 1ml-15ml microtubes and test tubes. This centrifuge features a quiet operations for a more peaceful laboratory environment. It also features a shorter height to fit under any cabinet, and auto-calibrating speed function for precision results. To run microhematocrit tubes, simply insert your 75mm capillary tubes into the carrier, place carriers in opposing tubes sleeves for a balanced load, and spin at 3,500 rpm for 6 minutes for clear separation.
ADVANTAGES
• Accurate speeds for specific g-forces
• Proper separations without cell damage
• Quiet, vibration-free operation
• Auto-brake stops the rotor in less than 30 seconds
• Spins 8, 75mm capillary tubes
• Designed, Engineered, and Assembled Proudly in America
FEATURES
• Angled rotor, 8-tube capacity
• Holds 1ml to 15ml size tubes and 75mm capillary tubes
• 12 volt DC maintenance-free motor
• Clear view port in lid for using tachometer
• Suction-cupped feet prevent slipping 110/220v auto-switching power adapter (CE, UL, cUL approved)
• Lid safety shut-off switch
• Maximum RCF=1,534g
WEIGHT AND DIMS
• Height: 9.5” (241mm)
• Length: 11” (279mm)
• Width: 11” (279mm)
• Weight: 9.5 lbs (4.3kg)
INCLUDES
• Eight-place rotor
• Eight 5ml-15ml blue tube sleeves
• Eight 3ml-4ml black tube sleeve inserts
• Six green tube inserts to spin 1ml-2ml
• Two 15ml metal tube shields
• Two 4-place Crit Carrier inserts (75mm capillary tubes)
• EZ Reader Card
E8 DIGITAL
3,500 rpm digital speed and time (blood, urines, microhematocrits, etc.)
Touch pad, programmable:
Speed: 500-3,500rpm
Time: 1-99mins
Stores last four programmed speeds & times
Service Indicator Light
LW Scientific V24 Combo
Accomplish both test tube and microhematocrit separations with the Universal centrifuge. The Universal centrifuge spins test tubes, capillary tubes or microtubes by simply changing rotors — no tools required! Achieve microhematocrit separations in three minutes at 12,000 rpm; then accurately determine results with the included reader disc. Other features include digital speed and time display, and all-metal body construction.
ADVANTAGES
One unit for all centrifuge needs Fast spin, fast stop, fast read Variable speed
Digital controls
Quiet vibration-free operation
Spin Microhematocrit or Test Tubes Easy-Change Rotors
FEATURES
Rubber feet to prevent slipping Impact-resistant safe-view lid All-metal body construction Cooling fan for motor compartment Heavy duty high-speed motor Safety shut off switch in lid Locking lid
Wide mouth for easy clean-up Digital readout
SPECIFICATIONS
12,000rpm on High speed setting
•Microhematocrit rotor: 14,500g
•Microtube rotor: 12,900g
4,000rpm on Low speed setting
•Test tube rotor: 2,415g
CONTROLS
Auto brake for quick stop
High/low speed settings
Digital programmable speed control Digital programmable time control
WEIGHT AND DIMS
Height: 11” (277mm)
Length: 17” (432mm)
Width: 14” (355mm)
Weight: 31.3 lbs (14.2kg)